Chapter 5 Web-Based Operations
124 Lynx II DSA User's Manual - 7096089
Ethernet
The Ethernet tab contains all settings specific to the Ethernet interface.
Figure 64:Ethernet Network Settings
UPnP
The UPnP tab contains the settings for Universal Plug and Play. This tab lets you specify
the name that is displayed by UPnP discovery and the number of network hops UPnP
messages may be transmitted over.
From the Factory Reset state, UPnP Discovery in the Lynx II is enabled. For the Lynx II
to appear as a UPnP device on your network, UPnP messaging must be permitted on your
network, and UPnP services must also be enabled on your PC. If the Lynx II is not visible
the Time-to-Live setting may need to be increased.
Figure 65: UPnP Network Settings
To Next Page
Loading...
