Appendix A Specifications
152 Lynx II DSA User's Manual - 7096089
Physical
MAIN ENCLOSURE – Metal
SIZE – 8.9 x 21.3 x 27.4 cm (3.5 x 8.4 x 10.8 in.) (H x W x D).
For rack-mounting purposes, this is one-half-width of a standard 19-inch electronics
cabinet wide by 2U high; two units may be configured for side-by-side rack mount
orientation using the available rack-mounting kit.
WEIGHT – 2.6 kg (5.7 lb).
SYSTEM COMPONENTS
• Lynx II Digital Signal Analyzer.
• Operator’s manual.
• 3 m (10 ft) CAT 5 Straight-thru UTP Ethernet cable.
• AC Adapter
• AC Line cord
Environmental
OPERATING TEMPERATURE RANGE – 0 to 50 °C (32 to 122 °F).
HUMIDITY – Up to 80% non-condensing.
Tested to the environmental conditions specified by EN 61010, Installation Category I,
Pollution Degree 2.
Ordering Information
LYNX-II – Digital Signal Analyzer. If using Genie 2000 software (optional), requires
Genie 2000 V3.4.1 or later.
Options
LYNX II-SDK – OS independent Software Development Kit.
LYNX II-MOUNTKIT - Lynx II-19 inch Rack Mount Kit; includes mounting hardware,
rack handles, and a spacer to allow mounting of one or two Lynx II units in a cabinet.