Mirion Technologies Lynx II DSA User Manual

Accessing the Lynx II Web Client User Interface
Lynx II DSA User's Manual – 7096089 71
Accessing the Lynx II Web Client User Interface
The default Lynx II Web Client interface is accessed by typing http://<Lynx address> into
your browser’s address bar. This rich, full-capability user interface is very intuitive and
provides the best user experience in terms of performance and ease of operation.
By default, the “Login required” feature on a new Lynx II DSA is disabled. If “Login
required” had been enabled, then the default Lynx II Web Client’s Login page similar to
the one shown below will be displayed.
Figure 38: Lynx II Web Client Login Page
If the Login page is displayed, the credentials that must be entered are:
• Name: Administrator. This value is fixed but is not case sensitive.
• Password: The pre-established password string.
The factory-default value is “password” and is case sensitive.

Mirion Technologies Lynx II DSA Specifications

General

Brand	Mirion Technologies
Model	Lynx II DSA
Category	Measuring Instruments
Language	English