Chapter 5 Web-Based Operations
74 Lynx II DSA User's Manual - 7096089
Data View
The spectral plot is the default data view. Anytime you connect to the device this view
will be initially displayed.
The title bar contains a description of the device you are connected to. The device
description that is shown in the title bar is the value assigned to the UPnP Friendly name.
This value is accessible in the Maintenance | Network Settings | UPnP option. After the
name is the IPv4 address. Note that if the UPnP name is changed, it will update in the
browser in which it was changed, but any other open browser sessions will need to be
refreshed to see the change.
Mostly the spectrum is displayed in this region. However, when accessing the Digital
Storage Oscilloscope (DSO), that will be displayed here as well. Both Auxiliary Counter
and SCA data can be viewed as a time series plot.
To Next Page
Loading...
Need help?
General
