Mirion Technologies Lynx II DSA User Manual

Chapter 5 Web-Based Operations
126 Lynx II DSA User's Manual - 7096089
Diagnostics
This option lets you view diagnostic information.
Status
The Status tab displays the following read-only settings.
Figure 68: Status Diagnostics Settings
System Error
Displays the error message associated with the system.
PHA Input Error
Displays the error message associated with the PHA input.
MCS Input Error
Displays the error message with the MCS input.
System Fault
Displays any fault status. Faults typically latch, meaning that once a fault develops the
message will be retained until acknowledged and cleared.
In most cases, fault status can be acknowledged and cleared with the Clear Faults &
Errors command (see below), once the condition that caused the fault has been resolved.
Persisting faults indicate that the condition causing the fault may not have been resolved,
or that service is required.
Clear Faults & Errors
Click on the Execute button to clear all faults and errors. Acknowledges and clears the
currently latched faults and errors. Persisting faults indicate that the condition causing the
fault may not have been resolved, or that service is required.

Mirion Technologies Lynx II DSA Specifications

General

Brand	Mirion Technologies
Model	Lynx II DSA
Category	Measuring Instruments
Language	English