Mirion Technologies Lynx II DSA - Deleting an MCA

Chapter 4 System Setup
32 Lynx II DSA User's Manual - 7096089
Figure 8: Adding the Lynx II DSA
4. Click on Add to add a Lynx II DSA to the MCA Input Definition Editor list.
You can add as many MCAs to the definition as are necessary for your system,
highlight each MCA and then click the Add button to add them to the MCA Input
Definition Editor list.
5. When you’ve finished adding MCAs, click on the Done button.
Deleting an MCA
If you want to remove an MCA that you have added to the definition, you can do it easily
by:
1. Select the table entry you want to delete. Be sure the entry to be deleted is
highlighted.
2. From the Edit, select Delete MCA.
3. The Delete MCA dialog box opens. Click on OK to remove the entry in the table.