Acquisition
Lynx II DSA User's Manual – 7096089 91
• Focus Color – Sets the color for the plot cursor when the expand box obtains focus.
It is also the color of the current ROI.
• Background Color – When checked, applies a color gradient to the plot
background. When cleared, the background is displayed as a solid color. Sets the
background color of the graph.
• Gridline Color – Sets the color of the gridlines.
Acquisition
The acquisition view displays two options.
• Acquisition – Select this option to display the acquisition settings.
• Calibrations – Select this option to display the calibration settings.
Acquisition Settings
The Acquisition settings activate the dialog for the current Input number displayed in the
Acquisition Panel. For Input #1 the acquisition settings for PHA, MSS, LIST, TLIST, and
DLFC will be activated. For Input #2, the acquisition settings for MCS will be activated.
The settings dialog will readjust dynamically depending on the various acquisition modes
for Input #1. For example, LIST/TLIST will require different settings than PHA or MSS.
Input #1 LIST/TLIST is not fully compatible when input #2 MCS. You cannot start
acquisition on input #2 when input #1 is acquiring LIST/TLIST data. The same is true
when input#2 is actively acquiring MCS data.
Acquisition Mode
This setting determines the mode of acquisition for the selected Input.
Acquisition mode for Input #1 can be set to PHA, DLFC, MSS, LIST, and TLIST.
Acquisition mode for Input #2 can be set to MCS. Where applicable, the settings dialogs
will adjust dynamically as the mode is selected.
Changing the Acquisition mode will clear the respective spectrum data and elapsed values.
To Next Page
Loading...
Need help?
General
