Mirion Technologies Lynx II DSA - Page 161

High Voltage Power Supplies
Lynx II DSA User's Manual – 7096089 151
Individual connectors for positive (HV+) and negative (HV–) high range (1500 V) and
5000V outputs. A separate connector is provided for the ±200 V output.
HVPS Range 1
The following applies to HVPS 1:
• OUTPUT – ±200 – 1500 V at 1 mA max.
• RIPPLE – 5 mV P-P.
• TEMPERATURE COEFFICIENT – ±50 ppm/°C.
• STABILITY – 0.01%/h, 0.02%/8 h.
• ACCURACY – ±5%. ±2.5% Typical.
• LOAD REGULATION – 1%.
• SETTING RESOLUTION – 12-bit (1/4096).
HVPS Range 2
The following applies to HVPS 2:
• OUTPUT – ±1500–5000V at 1 µA max.
• RIPPLE – 10 mV P-P.
• TEMPERATURE COEFFICIENT – ±50 ppm/°C.
• STABILITY – 0.01%/h, 0.02%/8 h.
• ACCURACY – ±5%. ±2.5% Typical.
• LOAD REGULATION – 1%.
• SETTING RESOLUTION – 12-bit (1/4096).
HVPS Range 3
The following applies to HVPS 3:
• OUTPUT – ±200 V at 100 nA max.
• RIPPLE – 10 mV P-P.
• TEMPERATURE COEFFICIENT – ±50 ppm/°C.
• STABILITY – 0.01%/h, 0.02%/8 h.
• ACCURACY – ±5% ±5 V. ±2.5% ±3 V Typical.
• LOAD REGULATION – 1%.
• SETTING RESOLUTION – 12-bit (1/4096).