11 - 11
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
INSTALLATION OF
BOOTOS AND
STANDARD MONITOR OS
11.3 Operation Settings
11.3.2 Display operation of operation setting
11.3.2 Display operation of operation setting
Restart after setting change
If return the display to the GOT setup screen by touching the button after the
setting of each item (excluding the security setting) is changed and touch the
button on the GOT setup screen, the GOT will restart.
After GOT restarts, it is displayed with the changed settings.
If restarted the GOT by powering OFF the GOT without the procedure above, the
setting contents are canceled without reflected.
GOT setup
Operation
Main menu
( Section 9.3 Utility Display)
Touch [GOT setup].
Touch [Operation].
Touch an item to
change settings.
If touch , the GOT restarts
and the changes are reflected.
To Next Page
Loading...
Need help?
General
