Mitsubishi GOT1000 GT11 - Display Operation of Project Information; Function of Project Information; Project Information

13 - 14
13.3 Project Information
13.3.1 Function of project information
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
INSTALLATION OF BOOTOS AND STANDARD MONITOR OS
13.3 Project Information
13.3.1 Function of project information
The project data files stored in each drive (A: Built-in CF card, C: Flash memory) can be displayed by lists.
In addition, the files can be downloaded, uploaded, deleted or copied, etc.
13.3.2 Display operation of project information
Function Contents Reference page
Information display of files and
folders
Displays the kind, name, data size, the creation date and time of the file or folder. 13-15, 13-16
Delete Deletes project data. 13-17
Copy Copies project data. (Enabled to copy only from the A drive to the A drive) 13-18
Property display Displays the project data creation date, author name and the version of GT Designer2. 13-19
Data check Data check of the file can be executed. 13-20
Download
Downloads the project data written in the A drive (Built-in CF card) to C drive (Flash
memory).
13-21
Upload
Uploads the project data written in the C drive (Flash memory) to the A drive (Built-in
CF card).
13-23
Program/Data control
Project information
Main menu
( Section 9.3 Utility Display)
Select the drive and
operate project data file.
Touch
[Program/data control].
Touch
[Project information].