13 - 25
13.4 Alarm Information
13.4.3 The display example of alarm information
13.4.3 The display example of alarm information
Display of creation date and time
The creation date and time display is not updated even if a file is created or updated
while displaying the alarm information display screen.
If close the screen currently displayed (moving the screen to the folder of the upper
hierarchy, etc.) and display the screen again, the updated contents are displayed.
Remark
Folders and files displayed
Refer to the following for the details of folders and files displayed.
Section 13.1.4 Display file
Number Item Contents
(1) Select drive
The drive of which file or folder is displayed can be selected. When the CF card is
not installed, [A: Built-in CF card] is not displayed.
(2) Kind
Indicates whether the displayed name is file or folder.
In case of file, displays the extension; in case of folder, displays "DIR".
(3) Name
Displays the file name or folder name held by the selected drive or folder.
When the file name or folder name exceeds 20 characters, the exceeding
characters (the 21th character and after) are not displayed.
(4) Path name Displays the path name of drive/folder which is currently displayed.
(5) Size Displays the size of the file displayed in Name.
(6) Date and time Displays the date and time when each file has been created.
(7) Drive size Displays the size in use and the entire size of the drive selected by "Select drive".
(8) Operation switch
Displays the execution switch of each function (Delete, copy) which can be
executed on the alarm information screen.
(9) Number of files Displays the total number of the displayed files.
Alarm information: Storage file/folder display screen
(2)
Alarm information screen
(1)
(3)
(4)
(5)
(6)
(7) (8)
(9)
To Next Page
Loading...
Need help?
General
