Mitsubishi GOT1000 GT11 - Display Operation of Touch Panel Check; Touch Panel Check; Touch Panel Check Function

14 - 15
14.6 Touch Panel Check
14.6.1 Touch panel check function
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
INSTALLATION OF BOOTOS AND STANDARD MONITOR OS
14.6 Touch Panel Check
14.6.1 Touch panel check function
Touch panel check is a function which checks whether there is no dead zone area in touch key minimum unit
(16 dots x 16 dots).
14.6.2 Display operation of touch panel check
Notes on Touch panel check
If the touched part is not filled with yellow color, there are the following two possible
causes.
1. Display part failure
2. Touch panel failure
In that case, contact your nearest sales office or FA Center.
Starting the touch panel check
Touching [Touch panel check] in the [Self check]
displays the screen describing the touch panel check
operation.
Touch the button in the description screen to
start the touch panel check.
Touch [Self check].
Touch [Debug & Self check].
Touch
[Touch panel check].
Debug & self check Self check
Main menu
( Section 9.3 Utility Display)
OK