14 - 21
14.8 System Alarm Display
14.8.3 Operating the system alarm display
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
INSTALLATION OF
BOOTOS AND
STANDARD MONITOR OS
14.8.3 Operating the system alarm display
1 System Alarm display resetting
(1) Before resetting System Alarm display
Eliminate each cause before resetting system alarms.
Without eliminating causes, System Alarm display cannot be reset even when
touching the [Reset] button.
(2) Processings with reset operation
The following data in the system information are also reset.
• GOT error code (Write device)
• GOT error detection signal (System Signal 2-1.b13)
1 Eliminate each cause of the system alarm
being occurred.
Error causes can be identified by the error
code, error message and channel No.
displayed on the System alarm display
screen.
( 18.
ERROR MESSAGE AND
SYSTEM ALARM)
2 Touch the button to reset system
alarms.
Touch.
Reset
To Next Page
Loading...
Need help?
General
