11 - 15
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
INSTALLATION OF
BOOTOS AND
STANDARD MONITOR OS
11.4 Security Level Change
11.4.3 Security level change operation
11.4.3 Security level change operation
1 Password input operation
Remark
About forgetting to return to the original level after changing security level temporarily
When use GOT after temporarily changing the security level, do not forget to return
the security level to the original level.
1 By touching to , to key, the
password of the changed security level is
input.
2 When correcting the input character, touch
key to delete the correcting character
and input the password again.
3 After inputting password, touch the
key.
When the password matches, a message
notifying successful change of the security
level is displayed.
When the password does not match, an
error message is displayed.
4 If button is touched it returns to the
password input screen again.
5 If button is touched it returns to
security setting screen.
0 9 A
F
Del
Enter
OK
To Next Page
Loading...
Need help?
General
