Mitsubishi GOT1000 GT11 User Manual

13 - 31
13.5 Memory Card Format
13.5.3 Format operation of memory card
13.5.3 Format operation of memory card
1 To format the CF card, install the CF card
to the GOT first.
For the CF card installation/removal
method, refer to the following.
Section 8.1 CF Card
2 Touch and select the drive to format by
[Select Drive].
3 If touch button, the password input
screen is displayed.
4 Type [1][1][1][1] and touch the key.
The dialog box shown on the left will
appear. (The password is fixed to 1111.)
Confirm the contents of the dialog.
When execute the CF card format, touch
button.
When cancel the CF card format, touch
button.
5 If touch button by , the dialog
mentioned left is displayed for reconfirm.
6 Reconfirm whether to format the CF card.
If touch button, starts formatting.
If touch button, cancels formatting.
Format
Enter
OK
Cancel
OK
OK
Cancel

Mitsubishi GOT1000 GT11 Specifications

General

Power Supply	24V DC
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 60°C
Screen Size	5.7 inches
Resolution	320 x 240 pixels
Communication Interface	RS-422/485, USB
Memory	Internal flash memory
CPU	RISC
Touch Panel	Analog Resistive