Mitsubishi GOT1000 GT11 User Manual

App - 8
Appendix 2 Usage Condition of Utility Function
Appendix 2 Usage Condition of Utility Function
The function which can be used differs according to the GOT type.
Moreover, there are the function which can be set with drawing software and the function which
cannot be set.
: Applicable : Not Applicatble - : Not required
(Continued to next page)
Setting items Function GT15
GT Soft
GOT 1000
GT11
Drawing
Setting
Connection settings
*1
Channel No. setting and communication driver
assignment to communication interface
Connection
detail settings
Communication parameter setting
Sequence program protection key word setting
(When connecting FX series PLC)
Sequence program protection key word deleting
(When connecting FX series PLC)
Sequence program protection status cancel (When
connecting FX series PLC)
GOT Setup
Display
settings
Opening screen time setting
Screen save time setting
Screen save backlight ON/OFF setting
-
Message language switching (Japanese/English/
Chinese (Simplified)/Chinese (Traditional)/Korean/
German)
*2
Battery alarm display ON/OFF setting
-
Screen saving human sensor enable/disable setting
Human sensor detect level setting
Display of human sensor detect time
Human sensor OFF delay setting
Invert colors ON/OFF setting
Brightness
/contrast
adjustment
Liquid crystal brightness setting
Liquid crystal contrast setting
V
V
V
V

Mitsubishi GOT1000 GT11 Specifications

General

Power Supply	24V DC
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 60°C
Screen Size	5.7 inches
Resolution	320 x 240 pixels
Communication Interface	RS-422/485, USB
Memory	Internal flash memory
CPU	RISC
Touch Panel	Analog Resistive