Mitsubishi GOT1000 GT11 - Display Operation of Display Setting

11 - 3
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
INSTALLATION OF BOOTOS AND STANDARD MONITOR OS
11.1 Display Settings
11.1.2 Display operation of display setting
11.1.2 Display operation of display setting
Restart after setting change
If return the display to the GOT setup screen by touching the button after the
setting of each item is changed and touch the button on the GOT setup screen,
the GOT will restart.
After GOT restarts, it is displayed with the changed settings.
If restarted the GOT by powering OFF the GOT without the procedure above, the
setting contents are canceled without reflected.
GOT setup
Display
Touch [GOT setup].
Touch [Display].
Main menu
( Section 9.3 Utility Display)
Touch an item to
change settings.
If touch , the GOT restarts
and the changes are reflected.