Mitsubishi GOT1000 GT11 User Manual

8 - 12
8.7 Stand
8.7.1 Applicable stand
8.7 Stand
Stand is used to fix the GOT to standing status in order to debug the monitor screen data easily.
8.7.1 Applicable stand
The following stand is applicable for GT11 .
8.7.2 Installing procedure
1 Adjust the mounting angle of GOT with the angle adjusting fitting of
the stand.
2 Put the GOT into the stand from the stand front side and fix it using
the fixtures.
For how to mount the GOT, refer to the following.
Section 6.5 Installation Procedure
For details of the stand, refer to the following.
GT05-50STAND
GOT1000 series User's Manual
A9GT-50STAND
A9GT-50STAND User's Manual
Product name Model Contents
Stand
GT05-50STAND
Stand for 5.7
"
A9GT-50STAND
Stand for 5.7"
Angle adjusting fitting
A
djust to
45 , 55 , 65 or 75 .
GOT
mounting face

Mitsubishi GOT1000 GT11 Specifications

General

Power Supply	24V DC
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 60°C
Screen Size	5.7 inches
Resolution	320 x 240 pixels
Communication Interface	RS-422/485, USB
Memory	Internal flash memory
CPU	RISC
Touch Panel	Analog Resistive