Mitsubishi GOT1000 GT11 - GOT Data Package Acquisition Operation

13 - 36
13.7 GOT data package acquisition
13.7.4 GOT data package acquisition operation
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
INSTALLATION OF BOOTOS AND STANDARD MONITOR OS
13.7.4 GOT data package acquisition operation
1 GOT data package acquisition operation on the display
Copy the following OS that is installed on the GOT and data to the CF card.
1 Touch [A: Standard CF Card] under Select
drive to highlight it.
Touch the button to begin copying.
2 Different dialogs appear, depending on the
status of the copying destination. Follow
the dialog that appears.
3 Upon completion of OS/Data copying, a
dialog that indicates a completion of
copying will appear.
Touch the button to close the dialog
window.
Copy
OK