13 - 37
13.7 GOT data package acquisition
13.7.4 GOT data package acquisition operation
2 Notes on copying operations
(1) Copying the OS/Project data to the GOT
When the OS or project data are copied to the memory card using the GOT data package
acquisition function and then to the GOT, the utility settings will also be copied.
After copying the OS and project data to the GOT, check the utility settings and reconfigure the
settings as necessary.
(2) Storage of other data on the CF card
When using the GOT data package acquisition function, do not store any other data to the memory
card.
Other data on the memory card will become unusable.
To Next Page
Loading...
