Mitsubishi GOT1000 GT11 - Memory Check Operation

14 - 5
14.3 Memory Check
14.3.3 Memory check operation
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
INSTALLATION OF BOOTOS AND STANDARD MONITOR OS
14.3.3 Memory check operation
Carries out write/read check of memory.
When drive is not displayed
When the drive (memory) to check is not displayed, confirm the mounting procedure
or memory type with reference to the following.
• CF card inserting/removing method Section 8.1 CF Card
When no faults are found in mounting, etc, a memory failure may be arisen.
Replace the CF card or Flash memory (C drive).
For details of Flash memory, contact your nearest sales office or FA Center.
The following example explains about Memory Check using Flash memory (C drive).
For the standard CF card (A drive) memory check, install the CF card before carrying out the same key
operations as Flash memory.
1 Select [Flash Memory] in the [Memory check]
setting screen, and touch the button.
If select the button, the numeric keyboard
window is displayed.
If select the button, the screen returns
to the initial menu.
2 Touch and then .
3 (The password is fixed to 5920.)
4 Touching executes read/write check for
the flash memory.
Check
OK
Cancel
5 9 2 0
Enter
Enter