Mitsubishi GOT1000 GT11 - Display Operation of Font Check; Font Check; Font Check Function

14 - 13
14.5 Font Check
14.5.1 Font check function
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
INSTALLATION OF BOOTOS AND STANDARD MONITOR OS
14.5 Font Check
14.5.1 Font check function
The font check is a function which confirms fonts installed in GOT. The character data of the font is displayed
on the upper left part of the screen one by one.
14.5.2 Display operation of font check
Notes on font check
Judged as normal if the following characters are correctly displayed. (UNICODE)
Alphabetic & etc. : 0 x 0000 to 0 x 04F9 (From basic Latin to Krill)
Hangul : 0 x AC00 to 0 x D7A3 (Hangul / Hangul auxiliary)
Chinese Characters : 0 x 4E00 to 0 x 9FA5 (CJK integrated Kanjis)
If the characters above are not displayed correctly, the fonts may not be normally
installed.
Install the Standard monitor OS again.
Debug & self check Self check
Display check
Touch [Self check].
Touch
[Debug & self check].
Main menu
( Section 9.3 Utility Display)
Starting font check
Touch [Font check] in the Display check
to display the screen describing the font
check operation. Touch the upper right
of the description screen to start the
font check.
Touch
[Display clock].
Touch [Font check].