12 - 4
12.1 Time Setting and Display
12.1.3 Clock setting operations
2 Clock display
Carry out the display and setting of GOT clock data.
When setting the clock data, change the clock data on the GOT and controller regardless of clock
setting.
The setup methods of clock data are shown below.
1 If touch the clock display section, the
keyboard for input is displayed and the
clock update stops.
2 Input time with the keyboard by referring to
the table below. Input the scheduled time
when the operation of is to be carried
out since the input time is reflected at the
time of the operation of .
The day of the week is displayed
automatically according to the input date.
Key Contents
to Key
Input numeric value in cursor position.
/ Key
Move the cursor.
Key
Move the cursor to the left by one character when Key is touched while inputting year,
month, day, time, minutes, seconds.
Carry out nothing when touched other than when inputting the above.
Key
Close the keyboard after the input time is displayed in clock display.
The update of the clock display does not restart even if the keyboard is closed.
The update of the clock display restarts with the operation of .
Key
Cancel the input time and returns the time of clock display to the time at which the keyboard
was displayed and close the keyboard.
The update of the clock display does not restart even if the keyboard is closed.
The update of the clock display restarts with the operation of .
0 9
Del
Del
Enter
Cancel
To Next Page
Loading...
Need help?
General
