12 - 5
12.1 Time Setting and Display
12.1.3 Clock setting operations
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
INSTALLATION OF
BOOTOS AND
STANDARD MONITOR OS
3 GOT internal battery voltage status
Displays battery voltage status.
When the battery voltage is low, replace the battery immediately.
Refer to the following for battery replacement procedure.
Section 8.4 Battery
3 Touching the button reflects the
settings and restarts updating the clock
display.
Then, the settings are reflected to both
clock data on the GOT and controller.
4 If touch button, the GOT restarts if the
clock settings is changed, or the screen
closes if clock settings is not changed.
If touch button without touching
button, the dialogue box shown on the left
is displayed.
button: The changed value is
canceled, and the screen
is closed.
button: The time display and
setting screen is displayed.
Display Status
Normal Normal
Low/None Low voltage
OK
OK
OK
Cancel
To Next Page
Loading...
Need help?
General
