Mitsubishi GOT1000 GT11 User Manual

17 - 3
17.3 Cleaning Method
17.3 Cleaning Method
Use the GOT always in a clean condition.
To clean the GOT, wipe the dirty part with a soft cloth using neutral detergent.
For the display operation of the [Clean] screen, refer to the following.
Chapter 15 CLEANING OF DISPLAY SECTION (CLEAN)
Precautions for cleaning
Do not use chemicals such as thinner, organic solvents and strong acids, since they
may cause the protective sheet to be deformed or the dissolvable paint on the
surface to peel off.
In addition, do not use spray solvents since they may cause the electrical failure of
the GOT and peripheral devices.
Clean
GRAPHIC OPERATION TERMINAL
GOT 1000
MITSUBISHI

Mitsubishi GOT1000 GT11 Specifications

General

Power Supply	24V DC
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 60°C
Screen Size	5.7 inches
Resolution	320 x 240 pixels
Communication Interface	RS-422/485, USB
Memory	Internal flash memory
CPU	RISC
Touch Panel	Analog Resistive