Mitsubishi GOT1000 GT11 - Memory Information; Memory Information Display Operation; Memory Information Function

13 - 32
13.6 Memory Information
13.6.1 Memory information function
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
INSTALLATION OF BOOTOS AND STANDARD MONITOR OS
Remark
Restrictions on formatting
• When use an unformatted CF card in GOT, format the CF card by PC.
GOT cannot format the unformatted CF card.
• The formatting of GOT does not change the file system (Example: FAT16)
of the CF card and inherits the file system before formatting.
13.6 Memory Information
13.6.1 Memory information function
The following shows the amount of the memory empty area size and boot Drive information empty area size
which can be used by the user of each drive (A: Standard CF card, C: Built-in Flash Memory).
13.6.2 Memory information display operation
7 When the formatting is completed, the
completion dialog mentioned left is
displayed.
8 If touch button, closes the dialog.
OK
Program/data control
Memory information
Main menu
( Section 9.3 Utility Display)
Select a drive and
then format it.
Touch
"Program/data control"
Touch
"Memory information"
Touch " "