Mitsubishi GOT1000 GT11 User Manual

13 - 21
13.3 Project Information
13.3.4 Operation of project information
6 Download
Transfers the project data from the A drive (Built-in CF card) to the C drive (Flash Memory).
1 Transfer the project data to be downloaded
to the GOT to the CF card, using GT
Designer2 or another GOT.
2 Install the CF card mentioned by to
GOT. Refer to the following for inserting/
removing method of CF card.
Section 8.1 CF Card
3 Touch [A: Built-in CF card] in [Select drive].
4 If touching button, the screen
mentioned left is displayed.
If touching button, the download is
executed.
Download
OK

Mitsubishi GOT1000 GT11 Specifications

General

Power Supply	24V DC
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 60°C
Screen Size	5.7 inches
Resolution	320 x 240 pixels
Communication Interface	RS-422/485, USB
Memory	Internal flash memory
CPU	RISC
Touch Panel	Analog Resistive