16 - 7
16.3 BootOS and Standard Monitor OS Installation Using CF Card
16.3.2 Installation method using the program/data control function (Utility)
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
INSTALLATION OF
BOOTOS AND
STANDARD MONITOR OS
4 The CF card access LED is lit during install
execution.
5 Do not pull out the CF card, power OFF, or
reset the GOT while the CF card access
card is lit.
6 After the installation is finished, the dialog
box shown on the left is displayed.
7 Touch the button to reboot the GOT.
8 After confirming that GOT restarted
normally, switch OFF the CF card access
switch of GOT.
9 Confirm the CF card access LED is
extinguished, remove the CF card from the
CF card interface of GOT.
OK
To Next Page
Loading...
