16 - 12
16.5 CoreOS
16.5.1 Installation method of CoreOS
2 Installation method of CoreOS
1 Write CoreOS from GT Designer2 to the
CF card
For details on the operation method of GT
Designer2, refer to the following manual.
GT Designer2 Version Basic
Operation/Data Transfer Manual
(8. TRANSFERRING DATA)
2 Check that the power of GOT main unit is
OFF, and then mount the CF card to GOT.
After mounting it, turn ON the CF card
access switch.
3 Turn ON the GOT power
After the power is turned on, CoreOS
installation execution screen is
automatically displayed after a brief
interval.
4 After the CF card access switch is turned
off, the installation of CoreOS is started.
To Next Page
Loading...
