Mitsubishi GOT1000 GT11 User Manual

App - 12
Appendix 2 Usage Condition of Utility Function
: Applicable : Not Applicatble - : Not required
Setting items Function GT15
GT Soft
GOT 1000
GT11
Drawing
Setting
Debug/Self check
Debug
System
monitor
Changing the present value of the device
monitor of PLC, the buffer memory monitor of
the test function and special memory, and the
buffer memory
Ladder
monitor
Displaying ladder monitor and executing hard
copy
A list editor
Changing PLC program of ACPU and
parameters
FX list
editor
List editing PLC program of FX PLC
Intelligent
module
monitor
Executing the monitor and data change for
the buffer memory of intelligent function
module on the dedicated screen
Or monitoring available to check the signal
status of I/O module
Network
monitor
Monitoring the network status of
MELSECNET/H, MELSECNET/10,
MELSECNET(II) and MELSECNET/B
Q motion
monitor
Servo monitor and parameter settings of the
motion controller CPU (Q series)
Servo
amplifier
monitor
Executing each monitor function, parameter
change, test operation and others of the
servo amplifier
CNC
monitor
Executing the position display monitor
equivalent to the display dedicated to
MELDAS, the alarm diagnosis monitor, the
tool offset/parameter, the program monitor,
etc.

Mitsubishi GOT1000 GT11 Specifications

General

Power Supply	24V DC
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 60°C
Screen Size	5.7 inches
Resolution	320 x 240 pixels
Communication Interface	RS-422/485, USB
Memory	Internal flash memory
CPU	RISC
Touch Panel	Analog Resistive