Mitsubishi GOT1000 GT11 - Page 81

9 - 3
9.2 Utility Function List
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
INSTALLATION OF BOOTOS AND STANDARD MONITOR OS
*1: Perform the following with the GT Designer2.
• Installing the communication driver
• Downloading the project data with communication settings (channel number and communication driver
assignment)
*2: Selectable languages vary, depending on the standard fonts that are installed.
*3: It is necessary to set the security level with GT Designer2.
*4: It is necessary to install the RS-232 connector for test. (Section 14.7 I/O Check)
Program/data control
OS information
Installing OS.
Uploading OS.
Property display of OS. (Kind, version, and date)
Data check of system file. (OS)
Project Information
Downloading project file.
Uploading project file.
Project file deleting.
Copying project file. (A drive A drive)
Property display of project file. (Date, version and screen title)
Data check of project file.
Alarm information
Deleting alarm log file.
Copying alarm log file.
Memory card format Formatting of CF card and Internal SRAM
Memory information Display of free memory space in GOT
GOT data package acquisition Copies the OS and project data to the memory card
Debug & Self check
Debug
System monitor
Device monitor of PLC, Test function, Present value change of the buffer memory
monitor and the buffer memory of intelligent module
A List editor Sequence program and parameter change of ACPU
FX list editor Sequence program and parameter change of FX PLC
Self check
Memory check
A drive memory check (Standard CF card)
C drive memory check (Built-in flash memory)
Drawing check Missing bits, color, draw, display and overlap display check of liquid crystal
Font check Installed fonts check
Touch panel
checking
Touch panel operation check
I/O check
Connected target confirmation
Self-loopback check
*4
System alarm display
Displaying GOT errors, CPU errors, network errors
Resetting GOT errors
GOT start time
Displaying GOT start date and time, current time, accumulated operating hours
Clean
Clean Display the screen to clean the display section.
Item Functions overview