9 - 10
9.3 Utility Display
9.3.3 Basic operation of settings change
2 Keyboard operation
1 Touch the numerical value to be changed.
2 Keyboard for numerical input is displayed and cursor is displayed simultaneously.
The key board display position changes by the position of numerical value touched.
(At the time of numerical input, displayed in the position which will not interrupt the inputting.)
3 Input numeric with keyboard.
• to Key : Input the numeric.
• Key : Touching the key completes numeric input and closes the keyboard.
• Key : Touching the key cancels numeric input and closes the keyboard.
• Key : Moves the cursor left or right if there is an item that can be entered.
• Key : key is used when canceling the input by 1 character.
• key and the key which is not mentioned do not function.
4 If key is touched, numeric input is completed and keyboard is closed.
Keyboard
Cursor
0 9
Enter Enter
Cancel Cancel
Del Del
*
Enter
To Next Page
Loading...
