10 - 11
10.2 Communication Detail Settings
10.2.3 Display contents of communication detail settings
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
INSTALLATION OF
BOOTOS AND
STANDARD MONITOR OS
1 Regist
Keyword is registered.
1 Touching the key pops up a keyboard for keyword input.
2 When the keyword is input and the key is touched, registration is completed.
For the keyword, 8 digits from 0 to 9 or A to F must be set.
*1: Refer to the manual for the PLC in use for the models that are compatible with the 2nd keyword.
*2: Registration options
Options can be selected among "Read/Write Protect", "Write Protect", or "All Protect".
For access restrictions of each setting, refer to the manual of the PLC to be used.
Ta r g e t P L C
Settings
When keyword and 2nd keyword are registered When only keyword is registered
FX PLC compatible with 2nd
keyword
*1
Registration options can be selected.
Registration options
*2
cannot be selected.
FX PLC not compatible with 2nd
keyword
*1
-
Regist
Enter
To Next Page
Loading...
