Motorola MC92N0-G User Manual

8 - 6 MC92N0-G User Guide
MC92N0-G turns itself
off.
MC92N0-G is
inactive.
The MC92N0-G turns off after a period of inactivity.
On Windows Embedded Handheld devices, check the power
settings by tapping Start > Settings > System > Power >
Advanced.
On Windows CE devices, check the power settings by tapping
Start > Settings > Control Panel > Power > Advanced.
On Android devices, touch > Display > Sleep.
Change the setting if you need a longer delay before the
automatic shutoff feature activates.
Battery is depleted. Replace the battery.
Tapping the window
buttons or icons does
not activate the
corresponding feature.
LCD screen not
aligned correctly.
Re-calibrate the screen.
The system is hung. Warm boot the system. To perform a warm boot (see Resetting
the MC92N0-G on page 2-24 for Windows devices and
Resetting the Android Device on page 3-15 for Android
devices ).
A message appears
stating that the
MC92N0-G memory is
full.
Too many files
stored on the
MC92N0-G.
Delete unused memos and records. You can save these records
on the host computer.
Too many
applications installed
on the MC92N0-G.
If you have installed additional applications on the MC92N0-G,
remove them to recover memory.
On Windows Embedded Handheld devices, tap Start > Settings
> System > Remove Programs.
On Windows CE devices, tap Start > Settings > Control Panel >
Remove Programs.
Select the unused program and tap Remove.
On Android devices, touch > App > Downloaded. Select the
unused downloaded application and touch Uninstall.
Table 8-1 Troubleshooting the MC92N0-G (Continued)
Problem Cause Solution

Motorola MC92N0-G Specifications

General

Brand	Motorola
Model	MC92N0-G
Category	Barcode Reader
Language	English