NAVI F-52 - Page 20

Chapter 1 Overview
1.2 Functions
F-52, 53, 54, 55 7
External
output
Performs printer test
（With power off, restart after
the printer is connected)
MAINTENANCE
→ PRINTER TEST
All models Page
140
Sets the printing data in
detail
SYSTEM SETUP →
PRINTER OUTPUT; EXACT
All models Page
136
Adjusts the analog output
Outputs 2V and 0V in ana-
log output and gives fine
adjustment
MAINTENANCE
→ ANALOG TEST
All models Page
141
Sets analog output alarm Each Measurement screen
→ F1(Measurement SETUP)
→ LIMIT; ON
All models
pH:
mV:
ION:
COND:
SALINITY:
RESISTI-
IVITY:
Page
43
Page
58
Page
86
Page
99
Page
106
Page
110
Data output via RS-232C After the serial cable connec-
tion, turn on the power, and
either startup the PC soft
-
ware or send commands by
the Hypertermial.
All models Page
154
Formats the compact flash
card
COMPACT FLASH SETUP
→ FORMAT
F-53,54,55 Page
145
Data write in the compact
flash card
COMPACT FLASH SETUP
→ WRITE DATA
F-53,54,55 Page
145
Writes personal data into
the compact flash card
（Password and Operator
name input becomes
unnecessary by the com
-
pact flash card containing
personal data)
COMPACT FLASH SETUP
→ WRITE OPERATOR
INFORMATION
F-53,54,55 Page
146
Perform setting before the
Ethernet output
NETWORK SETUP
→ IP ADDRESS
NETWORK SETUP
→ GATEWAY ADDRESS
NETWORK SETUP
→ SUBNET MASK
F-55 Page
148
Item Function How to set
Available
model
Refer
to