Issue 2.0
4-54 Features and Specifications
RELATED FEATURE LIST
Assigned Night Answer (ANA)
Authorization Code
Automatic Day/Night Mode Switching
Centralized Billing – K-CCIS
Code Restriction
Dial Access to Attendant – K-CCIS
Direct Inward Termination (DIT)
Flexible Ringing Assignment
Night Call Pickup
Night Chime
Night Transfer
Voice Mail Integration – K-CCIS
GUIDE TO FEATURE PROGRAMMING
This guide provides a list of associated Programs that support this feature.
Centralized Day/Night Mode Change Installation
Program/
Item No.
Description/Selection Assigned Data Comments
50-01-01
CCIS System Setting –
CCIS Availability
0 = Disable
1 = Enable
Default is 0
All CCIS settings lose functionality when this
setting is 0.
50-03-01
CCIS Destination System
Settings – Destination Point
Code
0~16367
Default is 0
Enable for all offices for Centralized Day/Night
mode change.
50-06-02
CCIS Feature Availability –
Centralized Day/Night
Switching (for message
receiver side)
0 = Disable
1 = Enable
Default is 1
If this data is set to 0, Link Reconnect does not run.
50-11-01
CCIS Centralized Day/Night
Switching Sending Group
Assignment – Destination
Point Code
Send Group (1~16)
Point Code (1~16367)
0 = No Setting
Default is 0
Select the Remote Office to send Day/Night
Switching control message.
To Next Page
Loading...
