Issue 2.0
8-14 IP Multiline Station (SIP)
SECTION 10 DHCP SERVER CONFIGURATION
It is possible to use either an external DHCP server (e.g., Windows Server) or the
UNIVERGE SV9100 internal DHCP server. With IP Phones, either of these options
requires the DHCP server to be configured to supply the IP terminal options.
If using the internal DHCP server, enable the DHCP server. Refer to 8.3 Example
Configuration 2 - Dynamic IP Addressing, One LAN on page 8-10.
When using an external DHCP server, you must add a new Option Code to the
DHCP scope for the GPZ-IPLE address. The method for adding this service varies
depending on the DHCP server used.
SECTION 11 AUTO CONFIG FOR IP TERMINALS SV9100
11.1 Required Equipment
IP Phone Manager and software to create the config file for the IP terminals.
Software is available for download free on the NEC website.
FTP server and free software available on the web.
DHCP Server supporting ability to define the following:
Vendor Class
Option Codes
To Next Page
Loading...
