EasyManua.ls Logo

NEC Univerge SV9100

NEC Univerge SV9100
766 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 2.0
8-2 IP Multiline Station (SIP)
SECTION 2 IP TO TDM CONVERSION
When an IP telephone calls a DT300/DT400 multiline telephone, single line
telephone or trunk, the speech must be converted from IP to TDM (Time Division
Multiplexing) technology. The GPZ-IPLE daughter board provides this function.
Each GPZ-IPLE has a number of DSP resources; each can convert a speech
channel from IP to TDM and vice versa.
It is possible for DT800/DT700 IP Phones to talk directly to other DT800/DT700 IP
Phones without using a GPZ-IPLE resource. For more information, refer to Section 6
Peer-to-Peer on page 8-7.
2.1 DT800/DT700 IP Multiline Telephones (ITL/ITZ)
The IP multiline telephone operates in the same way as a DT400 (DTZ)/DT300
(DTL) digital multiline telephone. It has all features and flexibility you expect from
a DT400/DT300 digital multiline telephone. The difference is that the IP telephone
has an RJ-45 for connection to an IP network, rather than an RJ-11 for connection
to a GCD-8DLCA/GCD-16DLCA.
Figure 8-1 DT800/DT700 IP Telephone (ITL)

Table of Contents

Other manuals for NEC Univerge SV9100

Related product manuals