NEC Univerge SV9100

Issue 2.0
SV9100 Networking Manual 2-7
4.2.6 CCIS Assignment
Use the table below to make the appropriate system-wide CCIS
assignments.
System A System B
Program 50-03-01
1. System ID 1~255 – Enter Destination
Point Code
2. System ID 1 = DPC 02
Program 50-03-01
1. System ID 1~255 – Enter
Destination Point Code
2. System ID 1 = DPC 01
Program 50-03-03
1. System ID 1~255 – Enter Destination
System IP Address.
2. System ID 1 = 192.168.1.20
3. System ID 2 = 192.168.1.21
Program 50-03-03
1. System ID 1~255 – Enter
Destination System IP Address
2. System ID 1 = 192.168.1.10
3. System ID 2 = 192.168.1.11
Program 50-04-01
CCIS Office Code Assignment Assign
up to four digits.
Default not assigned.
Program 50-04-01
CCIS Office Code Assignment Assign
up to four digits.
Default not assigned.
Program 50-13-01
CCIS Centralized Response Timeout
Assignment - IAI Response Timer
Enter 00~99.
Program 50-13-01
CCIS Centralized Response Timeout
Assignment - IAI Response Timer
Enter 00~99.
Program 50-06-01
CCIS Feature Availability - Link
Reconnect
0 = Not Available
1 = Available (default)
Program 50-06-01
CCIS Feature Availability - Link
Reconnect
0 = Not Available
1 = Available (default)
Program 50-05-01
CCIS Maximum Call Forwarding Hop
Counter
1~7
7 = Default
Program 50-05-01
CCIS Maximum Call Forwarding Hop
Counter
1~7
7 = Default