Issue 2.0
SV9100 Networking Manual 4-103
Station-to-Station Calling – K-CCIS
FEATURE DESCRIPTION
This feature permits any multiline terminal user to dial another multiline terminal
directly through a K-CCIS network.
For more details, refer to the UNIVERGE SV9100 Features and Specifications
Manual.
SYSTEM AVAILABILITY
Terminal Type:
All multiline terminals
Required Components:
GCD-CCTA
- OR -
GPZ-IPLE
OPERATING PROCEDURES
Normal call handling procedures apply.
SERVICE CONDITIONS
General:
If the called station is off-hook and has Call Queuing disabled, the originating
station receives a busy tone. If the called station is idle, the called station rings
and the caller hears ringback tone.
If the called station is off-hook on a call and has Call Queuing enabled, the
originating station receives ringback tone and the called station receives call
alert tone.
Station-to-Station Calling between tenants in the K-CCIS network is not
restricted.
The release process is First Party Release.
Restrictions:
The same telephone numbers cannot be duplicated in the same system.
To Next Page
Loading...
