NEC Univerge SV9100

Issue 2.0
6-28 SIP Trunking
Delete and replace the + and matched country code from an incoming SIP INVITE
using E.164 numbering scheme:
<Example Output>
Incoming call from: +4902131795770
Program 10-02-02 = 00
Displayed in terminal incoming caller history as:
Delete and replace the + and matched country code from an incoming SIP INVITE
using E.164 numbering scheme:
Table 6-3 Delete + and Country Code from Incoming SIP INVITE
Program 84-14-16 Program 84-14-13 Description
1: Mode 1 1: On
With a SIP INVITE for incoming calls. When a
+ is presented as the international
access code along with a country code that
DOES NOT match the value in
Program 10-02-01, then delete the
+ and add the international access code value
in Program 10-02-02 only.
- Or -
With a SIP INVITE for incoming calls. When a + is presented as the international
access code along with a country code that
DOES match the value in Program
10-02-01, then delete the
+ and country code but DO NOT add the international
access code value.
Original
Program 10-02-01 = 0
Program 10-02-01 = 49
Table 6-4 Delete + and Country Code from Incoming SIP INVITE
Program 84-14-16 Program 84-14-13 Description
2: Mode 2 1: On
With a SIP INVITE for incoming calls. When a
+ is presented as the international
access code along with a country code that
DOES NOT match the value in
Program 10-02-01, then delete the
+ and add the international access code value
in Program 10-02-02 only.
- Or -
With a SIP INVITE for incoming calls. When a + is presented as the international
access code along with a country code that
DOES match the value in Program
10-02-01, then delete the
+ and country code but DO NOT add the international
access code value.