Issue 2.0
SV9100 Networking Manual 4-65
Direct Inward Dialing – K-CCIS
FEATURE DESCRIPTION
This feature allows an incoming DID call (centralized DID) to be routed directly
across a K-CCIS link to reach a station in the remote system without Attendant
assistance.
For more details, refer to the UNIVERGE SV9100 Features and Specifications
Manual.
SYSTEM AVAILABILITY
Terminal Type:
All Stations
Required Components:
GCD-CCTA
- OR -
GPZ-IPLE
OPERATING PROCEDURES
Normal call handling procedures apply.
SERVICE CONDITIONS
General:
Call billing to the outside party starts when the incoming call connects to the
K-CCIS trunk.
When an incoming DID call from the CD-PRTA card with Caller ID information
is transferred to the station in K-CCIS network, the Caller ID Name and Number
follow across the K-CCIS network to the distant system.
This feature is supported when a Closed Numbering Plan or Open Numbering
is used.
The UNIVERGE SV9100 system supports DID Digit Conversion when using
station numbers with 2~8 digits.
An extension on a remote system can be the destination for the DID Received
Vacant Number Operation Assignment (Program 22-09-02).
To Next Page
Loading...
