NEC Univerge SV9100

Issue 2.0
SV9100 Networking Manual 8-61
15.8 SIP MLT Quick Startup Guide
The following guides describe the setup for a SIP MLT from a default state for
these modes:
 Plug and Play
 Automatic Registration
 Manual Registration
15.8.1 Plug and Play
1. Program 10-12
Assign the IPLE registration/signaling IP address, subnet mask, and
default gateway. If no customer provided default gateway is provided,
84-24-35
DT800/DT700
Multiline CODEC
Basic Information
Setup –
G.722 Jitter Buffer
Average
Average value of the dynamic jitter
buffer.
Range: 0 ~ 300ms
Default is 60
X
84-24-36
DT800/DT700
Multiline CODEC
Basic Information
Setup –
G.722 Jitter Buffer
Maximum
Maximum value of the dynamic jitter
buffer.
Range: 0 ~ 300ms
Default is 120
X
84-28-01
DT800/DT700
Multiline Firmware
Name Setup –
Firmware Directory
Maximum 64 characters. Default is No Setting X
84-28-02
DT800/DT700
Multiline Firmware
Name Setup –
Firmware File Name
Maximum 30 characters. Default is No Setting X
Program
Number
Program Name Description/Comments Assigned Data 1 2 3