NEC Univerge SV9100 User Manual

Issue 2.0
8-60 IP Multiline Station (SIP)
84-24-17
DT800/DT700
Multiline CODEC
Basic Information
Setup –
Jitter Buffer Mode
1 = Static
2 = Self adjusting
3 = Adaptive immediate
Default is 2
X
84-24-18
DT800/DT700
Multiline CODEC
Basic Information
Setup - Voice
Activity Detection
Threshold
0 ~ 30
Default is 20
84-24-23
DT800/DT700
Multiline CODEC
Basic Information
Setup -
Echo
Canceller Non-
linear Processing
Noise
40 ~ 70 dBm
Default is 70dBm
X
84-24-25
DT800/DT700
Multiline CODEC
Basic Information
Setup –
Echo Canceller 4W
DET
0 = Disable
1 = Enable
Default is 1
X
84-24-28
DT800/DT700
Multiline CODEC
Basic Information
Setup –
Audio Capability
Priority
This assigns the CODEC to be
used.
0~3
0 = G.711_PT
2 = G.729_PT
3 = G.722_PT
Default is 0
X
84-24-32
DT800/DT700
Multiline CODEC
Basic Information
Setup –
G.722 Audio Frame
Number
Amount of audio in each RTP
packet.
Range: 1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
Default is 3
X
84-24-33 --Not Used--
84-24-34
DT800/DT700
Multiline CODEC
Basic Information
Setup –
G.722 Jitter Buffer
Minimum
Minimum value of the dynamic jitter
buffer.
Range: 0 ~ 300ms
Default is 30
X
Program
Number
Program Name Description/Comments Assigned Data 1 2 3

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards