NEC Univerge SV9100

Issue 2.0
SV9100 Networking Manual 8-51
15.7 Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data 1 2 3
10-12-03
GCD-CP10 Network
Setup – Default
Gateway
IPLE uses the Default Gateway that
is assigned here.
0.0.0.0~
126.255.255.254
128.0.0.1~
191.254.255.254
192.0.0.1~
223.255.255.254
Default is 0.0.0.0
X
10-12-09
GCD-CP10 Network
Setup – IP Address
Assign Layer 3 IP Address to the
IPLE connected to CCPU.
0.0.0.0~
126.255.255.254
128.0.0.1~
191.254.255.254
192.0.0.1~
223.255.255.254
Default is 172.16.0.10
X
10-12-10
GCD-CP10 Network
Setup – Subnet
Mask
Assign Subnet Mask to the IPLE
connected to CCPU.
Default is 255.255.0.0 X
84-26-01
IPL Basic Setup – IP
Address
Assign an IP Address to IPLE Default Value:
172.16.0.10
X
84-26-02
IPL Basic Setup –
RTP Port Number
Range: 0 ~ 65534
Default Values:
RTP Port = 10020
X
84-26-03
IPL Basic Setup –
RTCP Port Number
(RTCP Port Number
+1)
Range: 0 ~ 65534
Default Values:
RTCP Port +1 = 10021
X