NEC Univerge SV9100

Issue 2.0
9-14 IP Single Line Telephone (SIP)
5.1.1 VoIPDB (DSP) Basic Setup
Use these programs to make basic VoIPDB assignments.
5.1.2 VoIP ToS Setup
Use this programs to define ToS.
5.1.3 SIP Peer-to-Peer
Use these programs to make SIP peer-to-peer assignments.
Program Number Program Name
Description/
Comments
Assigned Data 1 2 3
84-26-01
IPL Basic Setup – IP
Address
Default:
Slot 1 = 172.16.0.20
X
84-26-02
IPL Basic Setup – RTP
Port Number
Assign the RTP Port
Number.
0~65534
Default for is 10020
X
84-26-03
IPL Basic Setup –
RTCP Port Number
(RTCP Port Number +
1)
Assign the RTCP Port
Number.
0~65534
Default for is 10021
X
Program
Number
Program Name
Description/
Comments
Assigned Data 1 2 3
84-10-01
ToS Setup – ToS Mode Use this field to define
your SIP QoS marking
for ToS or Diffserve.
When Input Data is set
to 1, Item No. 07 is
invalid.
When Data is set to 2,
Item No. 02 ~ 06 are
invalid.
0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
Default is 0
X
Program
Number
Program Name
Description/
Comments
Assigned Data 1 2 3
15-05-50
IP Phone Basic Setup - Peer
to Peer Mode
Disabling 15-05-50
results in SIP MLT
Station-to-SIP MLT
Station calls
using a DSP resource.
0 = Off
1 = On
Default is 1
X