NEC Univerge SV9100

Issue 2.0
9-18 IP Single Line Telephone (SIP)
5.1.6 SIP Extension Basic Information Setup
Use these programs to assign basic SIP extension information.
5.1.7 IP Phone Configuration
Use these programs assign IP phone configuration information.
Program
Number
Program Name
Description/
Comments
Assigned Data 1 2 3
84-20-01
SIP Extension Basic
Information Setup – Registrar/
Proxy Port
Define SIP station
Proxy Port.
1~65535
Default is 5070
84-20-02
SIP Extension Basic
Information Setup – Session
Timer Value
Define the periodic
refresh time that allows
both user agents and
proxies to determine if
the SIP session is still
active.
0~65535
Default is 180
84-20-03
SIP Extension Basic
Information Setup – Minimum
Session Timer Value
Define to convey the
minimum allowed value
for the SIP session
timer.
0~65535
Default is 180
84-20-04
SIP Extension Basic
Information Setup – Called
Party Info
Define the SIP
Extension presented
Caller ID information.
0 = Request URI
1 = To Header
Default is 0
84-20-05
SIP Extension Basic
Information Setup – Expire
Value of Invite
Define the time out
response value for SIP
invite.
0~3600 seconds
Default is 180
Program
Number
Program Name
Description/
Comments
Assigned Data 1 2 3
15-05-01
IP Telephone Terminal Basic
Data Setup – Terminal Type
Review the type
protocol support by the
IP Phone.
Viewing Only – No
changes
permitted.
1 = H.323
2 = SIP
3 = None
4 = DT800/DT700
Default = 3