NEC Univerge SV9100

Issue 2.0
SV9100 Networking Manual 8-33
15.3.3 Tagging Data Packets Using IP Phone
Follow these steps program for data packet tagging using an IP telephone.
1. While logged in to the IP address of the phone on the PC, go to
Network Settings>Advanced Settings>PC Port Settings.
Refer to Section 15.3.1 Logging In on the PC on page 8-30.
2. Access the following three menus to select options for PC Port
Settings:
 Port VLAN Mode
 Port VLAN ID
 Port VLAN Priority.
3. Select the VLAN Mode to enable or disable this feature.
Figure 8-21 PC Port Settings Window