NEC Univerge SV9100

Issue 2.0
SV9100 Networking Manual 4-37
Calling Name Display – K-CCIS
FEATURE DESCRIPTION
This feature permits the station name of a calling or called party at another switching
office to be displayed on a multiline terminal, through the K-CCIS network.
For more details, refer to the UNIVERGE SV9100 Features and Specifications
Manual.
SYSTEM AVAILABILITY
Terminal Type:
All multiline terminals
Required Components:
GCD-CCTA
- OR -
GPZ-IPLE
OPERATING PROCEDURES
Normal call handling procedures apply.
SERVICE CONDITIONS
General:
 Both the caller/calling station number name and number can be displayed on
an UNIVERGE SV9100 station if allowed by Class of Service.
 For incoming or outgoing K-CCIS calls, the Calling/Called Name and Number
are displayed for the entire length of the call including the Elapsed Call Time.
RESTRICTIONS:
 In the UNIVERGE SV9100 system, only 12 digits/characters can be entered for
each station name.