Issue 2.0
4-36 Features and Specifications
GUIDE TO FEATURE PROGRAMMING
This guide provides a list of associated Programs that support this feature.
Program/
Item No.
Description/Selection Assigned Data Comments
20-09-07 Class of Service Options
(Incoming Call Service) –
Call Queuing
0 = Off
1 = On
Default is 0
To enable receiving Call Queuing.
20-06-01 Class of Service for
Extensions
0~ 15 Ext.101 is in Class 15. All others are in Class
1.(default)
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/
DIL/E&M Override
0 = Off
1 = On
Default is 1
Turn Off or On the extension ability to receive the
second call.
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off Hook
Signaling (Automatic
Override)
0 = Manually
1 = Automatically
Default is 1
Allow a busy extension user to manually or
automatically receive off-hook signals.
14-01-13 Basic Trunk Date setup –
Trunk-to-Trunk Transfer
Loop Supervision
0 = Disable
1 = Enable
Default is 1
Must enable for Trunk-to-Trunk Transfer,
Call-Forward – Off-Premise, or tandem trunking.
50-06-01 CCIS Feature Availability –
Link Reconnect
0 = Not Available
1 = Enable
Default is 1
Enable Link Reconnect.
To Next Page
Loading...
